Good day.
I encountered a problem. In version 13.3, the siis.ko driver was removed. I extracted it from the freebsd 13.5 distribution and copied it to /boot/kernel. I added the entry sis_load=YES to loader.conf. But my SiI3124 card (PCI-X 133MHz/64bit, 4 ports) is still not detected by the system after rebooting.
Tell me what I missed or didn’t do?
Did you tried to load it manually from shell?
kldload siis
What did dmesg say?
hello. thanks for the answer.
when loading the module manually (module name siis.ko)
kldload: can't load siis: module already loaded or in kernel
dmesg output
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.3-RELEASE-p4 n257491-41f6a830f8e TRUENAS amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(vga): text 80x25
CPU: Dual Core AMD Opteron(tm) Processor 280 (2393.75-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x20f12 Family=0xf Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
real memory = 17180917760 (16385 MB)
avail memory = 16576143360 (15808 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HP VIPER >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20201113/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20201113/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20201113/tbfadt-850)
ioapic0 <Version 1.1> irqs 0-23
ioapic1 <Version 1.1> irqs 24-27
ioapic2 <Version 1.1> irqs 28-31
ioapic3 <Version 1.1> irqs 32-55
Launching APs: 1 2 3
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
aesni0: No AES or SHA support.
padlock0: No ACE support.
acpi0: <HP CPQ0062>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce CK804 USB Controller> mem 0xf2100000-0xf2100fff irq 21 at device 2.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <NVIDIA nForce CK804 USB 2.0 controller> mem 0xfebf0000-0xfebf00ff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x38a0-0x38af at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x38d0-0x38d7,0x38f8-0x38fb,0x38d8-0x38df,0x38fc-0x38ff,0x38b0-0x38bf mem 0xf2102000-0xf2102fff irq 20 at device 7.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x38e0-0x38e7,0x3c00-0x3c03,0x38e8-0x38ef,0x3c04-0x3c07,0x38c0-0x38cf mem 0xf2103000-0xf2103fff irq 21 at device 8.0 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <serial bus, FireWire> at device 5.0 (no driver attached)
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x38f0-0x38f7 mem 0xf2104000-0xf2104fff irq 22 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Using defaults for TSO: 65518/35/2048
nfe0: Ethernet address: 00:16:35:37:03:08
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf0ffffff,0xd0000000-0xdfffffff,0xf1000000-0xf1ffffff irq 17 at device 0.0 on pci2
vgapci0: Boot video device
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
amdtemp1: <AMD CPU On-Die Thermal Sensors> on hostb7
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pci4: <memory> at device 0.0 (no driver attached)
pci4: <memory> at device 1.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xe8000-0xeffff pnpid ORM0000 on isa0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
device_attach: powernow1 attach returned 6
device_attach: powernow2 attach returned 6
device_attach: powernow3 attach returned 6
Timecounters tick every 1.000 msec
ugen0.1: <nVidia OHCI root HUB> at usbus0
ugen1.1: <nVidia EHCI root HUB> at usbus1
uhub0 on usbus1
uhub1 on usbus0
uhub0: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Trying to mount root from zfs:boot-pool/ROOT/default []...
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <SAMSUNG MZ7LN128HCHP-000H1 EMT02H0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1ZRNXAGC57645
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 122104MB (250069680 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ata0 bus 0 scbus0 target 1 lun 0
cd0: <LITE-ON COMBO SOHC-4836K SQK5> Removable CD-ROM SCSI device
cd0: Serial Number 2006012100025440
cd0: 44.400MB/s transfers (UDMA3, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub0: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)> at usbus0
ums0 on uhub1
ums0: <Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=0
lo0: link state changed to UP
SVM: not available.
module_register_init: MOD_LOAD (vmm, 0xffffffff836044e0, 0) error 6
nfe0: link state changed to UP
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
CPU: Dual Core AMD Opteron(tm) Processor 280 (2393.62-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x20f12 Family=0xf Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> K8/16/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
nfe0: link state changed to DOWN
nfe0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
nfsd: can't register svc name nfs@truenas.local jid:0
pid 870 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
nfe0: watchdog timeout (missed Tx interrupts) -- recovering
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device General UDisk (0xabcd:0x1234)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device General UDisk (0xabcd:0x1234)
ugen1.2: <General UDisk> at usbus1
umass0 on uhub0
umass0: <General UDisk, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:7:0: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <General UDisk 5.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 3841MB (7866368 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 done
All buffers synced.
GEOM_ELI: Device ada0p3.eli destroyed.
GEOM_ELI: Detached ada0p3.eli on last close.
Uptime: 18d5h39m29s
---<<BOOT>>---
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.3-RELEASE-p4 n257491-41f6a830f8e TRUENAS amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(vga): text 80x25
CPU: Dual Core AMD Opteron(tm) Processor 280 (2393.75-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x20f12 Family=0xf Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
real memory = 17180917760 (16385 MB)
avail memory = 16576139264 (15808 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <HP VIPER >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20201113/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20201113/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20201113/tbfadt-850)
ioapic0 <Version 1.1> irqs 0-23
ioapic1 <Version 1.1> irqs 24-27
ioapic2 <Version 1.1> irqs 28-31
ioapic3 <Version 1.1> irqs 32-55
Launching APs: 1 3 2
random: entropy device external interface
kbd1 at kbdmux0
vtvga0: <VT VGA driver>
aesni0: No AES or SHA support.
padlock0: No ACE support.
acpi0: <HP CPQ0062>
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
attimer0: Can't map interrupt.
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <nVidia nForce CK804 USB Controller> mem 0xf2100000-0xf2100fff irq 21 at device 2.0 on pci0
usbus0 on ohci0
usbus0: 12Mbps Full Speed USB v1.0
ehci0: <NVIDIA nForce CK804 USB 2.0 controller> mem 0xfebf0000-0xfebf00ff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x38a0-0x38af at device 6.0 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x38d0-0x38d7,0x38f8-0x38fb,0x38d8-0x38df,0x38fc-0x38ff,0x38b0-0x38bf mem 0xf2102000-0xf2102fff irq 20 at device 7.0 on pci0
ata2: <ATA channel> at channel 0 on atapci1
ata3: <ATA channel> at channel 1 on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x38e0-0x38e7,0x3c00-0x3c03,0x38e8-0x38ef,0x3c04-0x3c07,0x38c0-0x38cf mem 0xf2103000-0xf2103fff irq 21 at device 8.0 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <serial bus, FireWire> at device 5.0 (no driver attached)
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0x38f0-0x38f7 mem 0xf2104000-0xf2104fff irq 22 at device 10.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Using defaults for TSO: 65518/35/2048
nfe0: Ethernet address: 00:16:35:37:03:08
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci2: <ACPI PCI bus> on pcib2
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf0ffffff,0xd0000000-0xdfffffff,0xf1000000-0xf1ffffff irq 17 at device 0.0 on pci2
vgapci0: Boot video device
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb3
amdtemp1: <AMD CPU On-Die Thermal Sensors> on hostb7
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib4
pci4: <memory> at device 0.0 (no driver attached)
pci4: <memory> at device 1.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xe8000-0xeffff pnpid ORM0000 on isa0
powernow0: <Cool`n'Quiet K8> on cpu0
device_attach: powernow0 attach returned 6
device_attach: powernow1 attach returned 6
device_attach: powernow2 attach returned 6
device_attach: powernow3 attach returned 6
Timecounters tick every 1.000 msec
ugen0.1: <nVidia OHCI root HUB> at usbus0
ugen1.1: <nVidia EHCI root HUB> at usbus1
uhub0 on usbus0
uhub1 on usbus1
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Trying to mount root from zfs:boot-pool/ROOT/default []...
uhub0: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
Root mount waiting for: usbus1 CAM
ada0 at ata2 bus 0 scbus2 target 0 lun 0
ada0: <SAMSUNG MZ7LN128HCHP-000H1 EMT02H0Q> ACS-2 ATA SATA 3.x device
ada0: Serial Number S1ZRNXAGC57645
ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes)
ada0: 122104MB (250069680 512 byte sectors)
ada0: quirks=0x3<4K,NCQ_TRIM_BROKEN>
cd0 at ata0 bus 0 scbus0 target 1 lun 0
cd0: <LITE-ON COMBO SOHC-4836K SQK5> Removable CD-ROM SCSI device
cd0: Serial Number 2006012100025440
cd0: 44.400MB/s transfers (UDMA3, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
uhub1: 10 ports with 10 removable, self powered
Root mount waiting for: usbus1
ugen0.2: <Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)> at usbus0
ums0 on uhub0
ums0: <Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), class 0/0, rev 1.10/3.00, addr 2> on usbus0
ums0: 5 buttons and [XYZ] coordinates ID=0
lo0: link state changed to UP
SVM: not available.
module_register_init: MOD_LOAD (vmm, 0xffffffff836044e0, 0) error 6
nfe0: link state changed to UP
GEOM_ELI: Device ada0p3.eli created.
GEOM_ELI: Encryption: AES-XTS 128
GEOM_ELI: Crypto: software
CPU: Dual Core AMD Opteron(tm) Processor 280 (2393.62-MHz K8-class CPU)
Origin="AuthenticAMD" Id=0x20f12 Family=0xf Model=0x21 Stepping=2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> K8/16/48/0x1ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA>
nfe0: link state changed to DOWN
nfe0: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
nfsd: can't register svc name nfs@truenas.local jid:0
pid 878 (syslog-ng), jid 0, uid 0: exited on signal 6 (core dumped)
interface siis.1 already present in the KLD 'kernel'!
usb_msc_auto_quirk: UQ_MSC_NO_GETMAXLUN set for USB mass storage device General UDisk (0xabcd:0x1234)
usb_msc_auto_quirk: UQ_MSC_NO_SYNC_CACHE set for USB mass storage device General UDisk (0xabcd:0x1234)
ugen1.2: <General UDisk> at usbus1
umass0 on uhub1
umass0: <General UDisk, class 0/0, rev 2.00/1.00, addr 2> on usbus1
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:7:0: Attached to scbus7
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <General UDisk 5.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 3841MB (7866368 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
sorry, I don’t have rights to attach files
I suggest you use siis.ko from FreeBSD 13.3.
1 Like
Okay, I’ll try this option. After I do it, I’ll write the result.
Unfortunately it doesn’t work. The BIOS sees the card, but the system doesn’t. Adding modules PCCARD, ATA, ATASILICONEIMAGE, ATAPCI doesn’t help.
Can you boot into 13.0 to check which modules are loaded and get dmesg?