smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.44-production+truenas] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate IronWolf Pro Device Model: ST12000NE0008-2PK103 Serial Number: ZTN08BQW LU WWN Device Id: 5 000c50 0c32ba7b6 Firmware Version: CN03 User Capacity: 12,000,138,625,024 bytes [12.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.3/5625 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 12 06:54:10 2025 SAST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 575) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: (1090) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 067 064 044 Pre-fail Always - 218452320 3 Spin_Up_Time 0x0003 089 089 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 11 5 Reallocated_Sector_Ct 0x0033 097 097 010 Pre-fail Always - 11640 7 Seek_Error_Rate 0x000f 080 060 045 Pre-fail Always - 103524761 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1694 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 11 187 Reported_Uncorrect 0x0032 098 098 000 Old_age Always - 2 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 057 049 040 Old_age Always - 43 (Min/Max 40/49) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 54 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 92 194 Temperature_Celsius 0x0022 043 051 000 Old_age Always - 43 (0 25 0 0 0) 195 Hardware_ECC_Recovered 0x001a 007 001 000 Old_age Always - 218452320 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 8 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 8 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Pressure_Limit 0x0023 100 100 001 Pre-fail Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 1673h+30m+43.929s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 20331596272 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 13583972641 SMART Error Log Version: 1 ATA Error Count: 2 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2 occurred at disk power-on lifetime: 1686 hours (70 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 a8 20 62 05 Error: UNC at LBA = 0x056220a8 = 90316968 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 60 1a 62 45 00 31d+15:24:32.773 READ FPDMA QUEUED ea 00 00 00 00 00 00 00 31d+15:24:32.687 FLUSH CACHE EXT 61 00 08 ff ff ff 4f 00 31d+15:24:25.912 WRITE FPDMA QUEUED 60 00 c0 a0 12 62 45 00 31d+15:24:25.912 READ FPDMA QUEUED 60 00 c8 d8 0a 62 45 00 31d+15:24:20.663 READ FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 1685 hours (70 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 31d+15:13:39.425 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 31d+15:13:39.425 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 31d+15:13:34.453 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 31d+15:13:34.217 READ FPDMA QUEUED 60 00 08 ff ff ff 4f 00 31d+15:13:34.216 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 1665 1315017816 # 2 Extended offline Completed without error 00% 1275 - # 3 Extended offline Interrupted (host reset) 00% 926 - # 4 Extended offline Completed without error 00% 554 - # 5 Extended offline Interrupted (host reset) 00% 472 - # 6 Extended offline Completed without error 00% 193 - # 7 Short offline Completed without error 00% 129 - # 8 Short offline Completed without error 00% 57 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more