Can't Access the web GUI

TrueNAS General
1

I have had freenas running for years without issue.

Today I was unable to connect to my network folder on my NAS, and I was unable to connect to the web GUI. Plex was still running fine and all media stored on the NAS was accessible.

I unplugged my NAS and moved it to my office where I could plug it into a monitor.

WHen I started it I saw the network IP listed was 0.0.0.0. So I did the network configuration to set the IP to what it was before. It now shows the IP, but I still cannot connect over the network, the web GUI, and plex is now not working as I expected.

IMG_1340
IMG_13401695×1271 443 KB

Here is my ifconfig.

2

Hello and welcome to the forums.

Have you set a static IP or is it auto assigned via DHCP? If you exit out of that screen you could try and reset the network settings then reboot.

3

PS: love the ipconfig typo I do that all the time :rofl:

4

So I got impatient and reinstalled and I have the same issue. After a reinstall I have 0.0.0.0.

I thought maybe it was a hardware issue, but that wouldn’t make sense since Plex was working and my kids were watching a movie from the Plex while this was happening. I bought a new intel NIC just to be sure.

I set it to static IP using these steps:

5

Sounds odd. Have you got activity lights on the network port on your NAS?

6

Ummm good news and bad news. I started removing variables and after changing cables it works now…

So good news is whatever the issue is is resolved. Bad news, I reinstalled already lol.

I’ll move it back to it’s normal spot with the new CAT 6 cable and see if it is still good to go and update.

1 Like
7

Ya it’s working fine now. Gonna chalk this up to the cord? But everything seems like it is working fine now. Thanks for the help!

1 Like