</>smartctl -x /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.15-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HUH728080ALE601
Serial Number: VLHTYU8Y
LU WWN Device Id: 5 000cca 260d97055
Firmware Version: A4GL0001
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 18 15:28:03 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1], Master PW ID: 0xfffd
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S— 135 135 054 - 100
3 Spin_Up_Time POS— 100 100 024 - 0
4 Start_Stop_Count -O–C- 100 100 000 - 25
5 Reallocated_Sector_Ct PO–CK 100 100 005 - 321
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S— 140 140 020 - 15
9 Power_On_Hours -O–C- 100 100 000 - 5806
10 Spin_Retry_Count PO–C- 100 100 060 - 0
12 Power_Cycle_Count -O–CK 100 100 000 - 25
22 Unknown_Attribute PO—K 100 100 025 - 100
192 Power-Off_Retract_Count -O–CK 100 100 000 - 396
193 Load_Cycle_Count -O–C- 100 100 000 - 396
194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 0/56)
196 Reallocated_Event_Count -O–CK 100 100 000 - 321
197 Current_Pending_Sector -O—K 100 100 000 - 0
198 Offline_Uncorrectable —R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
231 Temperature_Celsius -O–CK 100 100 000 - 0
241 Total_LBAs_Written -O–C- 100 100 000 - 42464056976
242 Total_LBAs_Read -O–C- 100 100 000 - 112657175306
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80 GPL R/W 688 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xb2 GPL VS 688 Device vendor specific log
0xc8 GPL VS 12 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 5743 -
2 Short offline Completed without error 00% 5575 -
3 Short offline Completed without error 00% 5407 -
4 Short offline Completed without error 00% 5239 -
5 Short offline Completed without error 00% 5071 -
6 Short offline Completed without error 00% 4903 -
7 Short offline Completed without error 00% 4735 -
8 Short offline Completed without error 00% 4567 -
9 Short offline Completed without error 00% 4399 -
#10 Short offline Completed without error 00% 4231 -
#11 Short offline Completed without error 00% 4063 -
#12 Short offline Completed without error 00% 3895 -
#13 Short offline Completed without error 00% 3727 -
#14 Short offline Completed without error 00% 3559 -
#15 Short offline Completed without error 00% 3391 -
#16 Short offline Completed without error 00% 3223 -
#17 Short offline Completed without error 00% 3056 -
#18 Short offline Completed without error 00% 2888 -
#19 Short offline Completed without error 00% 2719 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 39/49 Celsius
Lifetime Min/Max Temperature: 0/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (7)
Index Estimated Time Temperature Celsius
8 2025-03-18 13:21 43 ************************
… …(126 skipped). … ************************
7 2025-03-18 15:28 43 ************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 25 — Lifetime Power-On Resets
0x01 0x010 4 5806 — Power-on Hours
0x01 0x018 6 42464056976 — Logical Sectors Written
0x01 0x020 6 517310488 — Number of Write Commands
0x01 0x028 6 112657175306 — Logical Sectors Read
0x01 0x030 6 414835935 — Number of Read Commands
0x01 0x038 6 20903463350 — Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 5081 — Spindle Motor Power-on Hours
0x03 0x010 4 5081 — Head Flying Hours
0x03 0x018 4 396 — Head Load Events
0x03 0x020 4 321 — Number of Reallocated Logical Sectors
0x03 0x028 4 3 — Read Recovery Attempts
0x03 0x030 4 0 — Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 — Number of Reported Uncorrectable Errors
0x04 0x010 4 0 — Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 43 — Current Temperature
0x05 0x010 1 41 N-- Average Short Term Temperature
0x05 0x018 1 43 N-- Average Long Term Temperature
0x05 0x020 1 56 — Highest Temperature
0x05 0x028 1 0 — Lowest Temperature
0x05 0x030 1 52 N-- Highest Average Short Term Temperature
0x05 0x038 1 0 N-- Lowest Average Short Term Temperature
0x05 0x040 1 49 N-- Highest Average Long Term Temperature
0x05 0x048 1 0 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 — Time in Over-Temperature
0x05 0x058 1 60 — Specified Maximum Operating Temperature
0x05 0x060 4 0 — Time in Under-Temperature
0x05 0x068 1 0 — Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 20 — Number of Hardware Resets
0x06 0x010 4 30 — Number of ASR Events
0x06 0x018 4 0 — Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 20 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
</>smartctl -x /dev/sdb
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.15-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Ultrastar He8
Device Model: HGST HUH728080ALE604
Serial Number: VLGL9V7Y
LU WWN Device Id: 5 000cca 260c853a4
Firmware Version: A4ADWDA0
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 18 15:28:37 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1117) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S— 132 132 054 - 112
3 Spin_Up_Time POS— 153 153 024 - 412 (Average 450)
4 Start_Stop_Count -O–C- 100 100 000 - 152
5 Reallocated_Sector_Ct PO–CK 100 100 005 - 2
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S— 140 140 020 - 15
9 Power_On_Hours -O–C- 092 092 000 - 60108
10 Spin_Retry_Count PO–C- 100 100 060 - 0
12 Power_Cycle_Count -O–CK 100 100 000 - 137
22 Helium_Level PO—K 086 086 025 - 86
192 Power-Off_Retract_Count -O–CK 100 100 000 - 843
193 Load_Cycle_Count -O–C- 100 100 000 - 843
194 Temperature_Celsius -O---- 139 139 000 - 43 (Min/Max 25/55)
196 Reallocated_Event_Count -O–CK 100 100 000 - 2
197 Current_Pending_Sector -O—K 100 100 000 - 1904
198 Offline_Uncorrectable —R-- 100 100 000 - 398
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 60045 -
2 Short offline Completed without error 00% 59879 -
3 Short offline Completed without error 00% 59709 -
4 Short offline Completed without error 00% 59541 -
5 Short offline Completed without error 00% 59373 -
6 Short offline Completed without error 00% 59205 -
7 Short offline Completed without error 00% 59039 -
8 Short offline Completed without error 00% 58869 -
9 Short offline Completed without error 00% 58701 -
#10 Short offline Completed without error 00% 58533 -
#11 Short offline Completed without error 00% 58365 -
#12 Short offline Completed without error 00% 58198 -
#13 Short offline Completed without error 00% 58029 -
#14 Short offline Completed without error 00% 57861 -
#15 Short offline Completed without error 00% 57693 -
#16 Short offline Completed without error 00% 57525 -
#17 Short offline Completed without error 00% 57360 -
#18 Short offline Completed without error 00% 57189 -
#19 Short offline Completed without error 00% 57021 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 38/48 Celsius
Lifetime Min/Max Temperature: 25/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (18)
Index Estimated Time Temperature Celsius
19 2025-03-18 13:21 43 ************************
… …(126 skipped). … ************************
18 2025-03-18 15:28 43 ************************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 137 — Lifetime Power-On Resets
0x01 0x010 4 60108 — Power-on Hours
0x01 0x018 6 1328163688292 — Logical Sectors Written
0x01 0x020 6 2352395681 — Number of Write Commands
0x01 0x028 6 3905482130905 — Logical Sectors Read
0x01 0x030 6 14576922391 — Number of Read Commands
0x01 0x038 6 216390281150 — Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 5093 — Spindle Motor Power-on Hours
0x03 0x010 4 5093 — Head Flying Hours
0x03 0x018 4 843 — Head Load Events
0x03 0x020 4 2 — Number of Reallocated Logical Sectors
0x03 0x028 4 1 — Read Recovery Attempts
0x03 0x030 4 0 — Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 — Number of Reported Uncorrectable Errors
0x04 0x010 4 0 — Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 43 — Current Temperature
0x05 0x010 1 41 N-- Average Short Term Temperature
0x05 0x018 1 43 N-- Average Long Term Temperature
0x05 0x020 1 55 — Highest Temperature
0x05 0x028 1 25 — Lowest Temperature
0x05 0x030 1 51 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 46 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 — Time in Over-Temperature
0x05 0x058 1 60 — Specified Maximum Operating Temperature
0x05 0x060 4 0 — Time in Under-Temperature
0x05 0x068 1 0 — Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 10 — Number of Hardware Resets
0x06 0x010 4 30 — Number of ASR Events
0x06 0x018 4 0 — Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
</>smartctl -x /dev/sdc
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.15-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: HGST Ultrastar He8
Device Model: HGST HUH728080ALE604
Serial Number: VLGLY07Y
LU WWN Device Id: 5 000cca 260c89b92
Firmware Version: A4ADWDA0
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 18 15:29:10 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1083) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S— 134 134 054 - 104
3 Spin_Up_Time POS— 150 150 024 - 418 (Average 456)
4 Start_Stop_Count -O–C- 100 100 000 - 55
5 Reallocated_Sector_Ct PO–CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S— 140 140 020 - 15
9 Power_On_Hours -O–C- 092 092 000 - 59230
10 Spin_Retry_Count PO–C- 100 100 060 - 0
12 Power_Cycle_Count -O–CK 100 100 000 - 55
22 Helium_Level PO—K 100 100 025 - 100
192 Power-Off_Retract_Count -O–CK 100 100 000 - 706
193 Load_Cycle_Count -O–C- 100 100 000 - 706
194 Temperature_Celsius -O---- 146 146 000 - 41 (Min/Max 25/56)
196 Reallocated_Event_Count -O–CK 100 100 000 - 0
197 Current_Pending_Sector -O—K 100 100 000 - 0
198 Offline_Uncorrectable —R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 1
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It “wraps” after 49.710 days.
Error 1 [0] occurred at disk power-on lifetime: 53424 hours (2226 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER – ST COUNT LBA_48 LH LM LL DV DC
– – – == – == == == – – – – –
84 – 51 00 40 00 03 a3 81 28 1f 40 00 Error: ICRC, ABRT 64 sectors at LBA = 0x3a381281f = 15628052511
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
– == – == – == == == – – – – – --------------- --------------------
25 00 00 00 50 00 03 a3 81 28 10 40 00 00:00:19.632 READ DMA EXT
25 00 00 00 08 00 03 a3 81 28 00 40 00 00:00:19.631 READ DMA EXT
25 00 00 00 28 00 03 a3 81 27 d8 40 00 00:00:19.630 READ DMA EXT
25 00 00 00 a8 00 03 a3 81 27 28 40 00 00:00:19.628 READ DMA EXT
25 00 00 00 20 00 03 a3 81 27 00 40 00 00:00:19.628 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 59167 -
2 Short offline Completed without error 00% 59001 -
3 Short offline Completed without error 00% 58831 -
4 Short offline Completed without error 00% 58663 -
5 Short offline Completed without error 00% 58495 -
6 Short offline Completed without error 00% 58327 -
7 Short offline Completed without error 00% 58161 -
8 Short offline Completed without error 00% 57991 -
9 Short offline Completed without error 00% 57823 -
#10 Short offline Completed without error 00% 57655 -
#11 Short offline Completed without error 00% 57487 -
#12 Short offline Completed without error 00% 57321 -
#13 Short offline Completed without error 00% 57151 -
#14 Short offline Completed without error 00% 56983 -
#15 Short offline Completed without error 00% 56815 -
#16 Short offline Completed without error 00% 56647 -
#17 Short offline Completed without error 00% 56481 -
#18 Short offline Completed without error 00% 56312 -
#19 Short offline Completed without error 00% 56144 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 36/45 Celsius
Lifetime Min/Max Temperature: 25/56 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (62)
Index Estimated Time Temperature Celsius
63 2025-03-18 13:22 40 *********************
… …( 19 skipped). … *********************
83 2025-03-18 13:42 40 *********************
84 2025-03-18 13:43 41 **********************
85 2025-03-18 13:44 40 *********************
… …( 14 skipped). … *********************
100 2025-03-18 13:59 40 *********************
101 2025-03-18 14:00 41 **********************
102 2025-03-18 14:01 40 *********************
103 2025-03-18 14:02 40 *********************
104 2025-03-18 14:03 41 **********************
105 2025-03-18 14:04 41 **********************
106 2025-03-18 14:05 40 *********************
… …( 15 skipped). … *********************
122 2025-03-18 14:21 40 *********************
123 2025-03-18 14:22 41 **********************
124 2025-03-18 14:23 40 *********************
125 2025-03-18 14:24 41 **********************
… …( 63 skipped). … **********************
61 2025-03-18 15:28 41 **********************
62 2025-03-18 15:29 40 *********************
SCT Error Recovery Control:
Read: 70 (7.0 seconds)
Write: 70 (7.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 55 — Lifetime Power-On Resets
0x01 0x010 4 59230 — Power-on Hours
0x01 0x018 6 1195821705579 — Logical Sectors Written
0x01 0x020 6 2252915266 — Number of Write Commands
0x01 0x028 6 3778734489193 — Logical Sectors Read
0x01 0x030 6 14151229822 — Number of Read Commands
0x01 0x038 6 213230844100 — Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 5096 — Spindle Motor Power-on Hours
0x03 0x010 4 5096 — Head Flying Hours
0x03 0x018 4 706 — Head Load Events
0x03 0x020 4 0 — Number of Reallocated Logical Sectors
0x03 0x028 4 1 — Read Recovery Attempts
0x03 0x030 4 0 — Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 — Number of Reported Uncorrectable Errors
0x04 0x010 4 0 — Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 41 — Current Temperature
0x05 0x010 1 39 N-- Average Short Term Temperature
0x05 0x018 1 40 N-- Average Long Term Temperature
0x05 0x020 1 56 — Highest Temperature
0x05 0x028 1 25 — Lowest Temperature
0x05 0x030 1 52 N-- Highest Average Short Term Temperature
0x05 0x038 1 25 N-- Lowest Average Short Term Temperature
0x05 0x040 1 47 N-- Highest Average Long Term Temperature
0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 — Time in Over-Temperature
0x05 0x058 1 60 — Specified Maximum Operating Temperature
0x05 0x060 4 0 — Time in Under-Temperature
0x05 0x068 1 0 — Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 20 — Number of Hardware Resets
0x06 0x010 4 30 — Number of ASR Events
0x06 0x018 4 1 — Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 20 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
</>smartctl -x /dev/sdd
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.15-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: HUH728080ALE601
Serial Number: VKGZEX3X
LU WWN Device Id: 5 000cca 254cdd756
Firmware Version: A4GL0003
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5528
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 18 15:30:04 2025 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1], Master PW ID: 0xfffd
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S— 135 135 054 - 100
3 Spin_Up_Time POS— 100 100 024 - 0
4 Start_Stop_Count -O–C- 100 100 000 - 25
5 Reallocated_Sector_Ct PO–CK 100 100 005 - 23
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S— 140 140 020 - 15
9 Power_On_Hours -O–C- 100 100 000 - 5806
10 Spin_Retry_Count PO–C- 100 100 060 - 0
12 Power_Cycle_Count -O–CK 100 100 000 - 25
22 Unknown_Attribute PO—K 100 100 025 - 100
45 Unknown_Attribute PO—K 100 100 001 - 1095233372415
192 Power-Off_Retract_Count -O–CK 100 100 000 - 230
193 Load_Cycle_Count -O–C- 100 100 000 - 230
194 Temperature_Celsius -O---- 157 157 000 - 38 (Min/Max 0/54)
196 Reallocated_Event_Count -O–CK 100 100 000 - 23
197 Current_Pending_Sector -O—K 100 100 000 - 0
198 Offline_Uncorrectable —R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
231 Temperature_Celsius -O–CK 100 100 000 - 3
241 Total_LBAs_Written -O–C- 100 100 000 - 42448830032
242 Total_LBAs_Read -O–C- 100 100 000 - 112718648210
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x15 GPL R/W 1 Rebuild Assist log
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x24 GPL R/O 256 Current Device Internal Status Data log
0x25 GPL R/O 256 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80 GPL R/W 688 Host vendor specific log
0x81-0x9f GPL,SL R/W 16 Host vendor specific log
0xb2 GPL VS 688 Device vendor specific log
0xc8 GPL VS 12 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
1 Short offline Completed without error 00% 5743 -
2 Short offline Completed without error 00% 5575 -
3 Short offline Completed without error 00% 5407 -
4 Short offline Completed without error 00% 5239 -
5 Short offline Completed without error 00% 5071 -
6 Short offline Completed without error 00% 4903 -
7 Short offline Completed without error 00% 4735 -
8 Short offline Completed without error 00% 4567 -
9 Short offline Completed without error 00% 4399 -
#10 Short offline Completed without error 00% 4231 -
#11 Short offline Completed without error 00% 4063 -
#12 Short offline Completed without error 00% 3895 -
#13 Short offline Completed without error 00% 3727 -
#14 Short offline Completed without error 00% 3559 -
#15 Short offline Completed without error 00% 3391 -
#16 Short offline Completed without error 00% 3223 -
#17 Short offline Completed without error 00% 3056 -
#18 Short offline Completed without error 00% 2888 -
#19 Short offline Completed without error 00% 2719 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 32/42 Celsius
Lifetime Min/Max Temperature: 0/54 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (11)
Index Estimated Time Temperature Celsius
12 2025-03-18 13:23 38 *******************
… …(126 skipped). … *******************
11 2025-03-18 15:30 38 *******************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 25 — Lifetime Power-On Resets
0x01 0x010 4 5806 — Power-on Hours
0x01 0x018 6 42448830032 — Logical Sectors Written
0x01 0x020 6 517267698 — Number of Write Commands
0x01 0x028 6 112718648210 — Logical Sectors Read
0x01 0x030 6 414646481 — Number of Read Commands
0x01 0x038 6 20903601300 — Date and Time TimeStamp
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 5080 — Spindle Motor Power-on Hours
0x03 0x010 4 5080 — Head Flying Hours
0x03 0x018 4 230 — Head Load Events
0x03 0x020 4 23 — Number of Reallocated Logical Sectors
0x03 0x028 4 1564 — Read Recovery Attempts
0x03 0x030 4 0 — Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 — Number of Reported Uncorrectable Errors
0x04 0x010 4 0 — Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 — Current Temperature
0x05 0x010 1 36 N-- Average Short Term Temperature
0x05 0x018 1 37 N-- Average Long Term Temperature
0x05 0x020 1 54 — Highest Temperature
0x05 0x028 1 0 — Lowest Temperature
0x05 0x030 1 50 N-- Highest Average Short Term Temperature
0x05 0x038 1 0 N-- Lowest Average Short Term Temperature
0x05 0x040 1 47 N-- Highest Average Long Term Temperature
0x05 0x048 1 0 N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 — Time in Over-Temperature
0x05 0x058 1 60 — Specified Maximum Operating Temperature
0x05 0x060 4 0 — Time in Under-Temperature
0x05 0x068 1 0 — Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 20 — Number of Hardware Resets
0x06 0x010 4 30 — Number of ASR Events
0x06 0x018 4 0 — Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 19 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 20 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS