Hello Guys, Just setup my TrueNAS machine to do some disks test. I had a 9400-1i laying (purchased earlier) and i updated the firmware back then. Here’s what i can see at the moment. I’m not sure which profile was flashed as it comes in SAS_SATA and NVMe Mixed version. Secondly, i’m not sure if it …

Given that the usual test is a finger test (when I press my finger against the LSI chipset, do I go Ow) I would suggest that 49 is OK

Feels normal. Neither too hot neither too cold to touch. Of course, the fins, did not touched the PCB.

[image] Fastline: Support JBOD = No If not mistaken it is in IR mode

If it is a LSI 9400-16i, would it even have an IR mode? That model number should be a ‘plain’ HBA but I am not familiar with the newer StorCLI software nor the results it returns compared to sas2flash and sas3flash. The reality is you have to go over the documentation for that card and the softwa…

Was going off of the past: [image] Broadcom 9500-16i ... no BIOS? Firmware updates not supported TrueNAS General If the card is in IR mode which the above suggests it is then when moving from IR mode to IT you often need to erase the firmware first like this: …

As per my check, the LSI 9400-16i has only IT firmware available from Broadcom.

LSI 9400-16i Help

TrueNAS General

Fleshmauler April 28, 2026, 11:22pm 6

Was going off of the past:

Topic		Replies	Views
LSI-9201-16E Troubles TrueNAS General SCALE , Hardware	26	951	July 27, 2024
TrueNAS starts but is inaccessible when detaching the original Disk after pool Migration TrueNAS General SCALE , ZFS	18	114	July 3, 2025
Storage Health question TrueNAS General	45	424	April 7, 2026
Should I be worried about this error message? TrueNAS General Hardware	12	196	November 21, 2025
Smart tests reporting pending sector errors TrueNAS General	11	134	March 28, 2025

LSI 9400-16i Help

Related topics