Need help with post to TrueNAS Scale

TrueNAS General
1

Its my first time entering homelabbing and NAS. i have this wierd issue with my set up

huananzhi x99-f8
bios ver 2.18.1263
xeon e5 2680v4
64gb ram
256gb nvme

to post in TrueNAS Scale i have to first boot in bios and next hit f10 to continue booting to TrueNAS. if i dont do it it give me post code Ad. (but i dont see this issue with core or windows) i all ready tested all hardware issues related to this post code and nothing changed. i asked my buddy who owns xeon too if he had this issue too, and he sayd no but he is using windows. i think this issue related to software so this is why i writing it in hope someone will help me with it.

2

I don’t see anything by looking at the user manual or BIOS manual.

Please looks at other threads in the forum and take the new user tutorial. We need to get your trust level up so you have more forum posting rights.

TrueNAS-Bot
Type this in a new reply and send to bring up the tutorial, if you haven’t done it already.

@TrueNAS-Bot start tutorial

You can check your hardware and make sure everything is seated or connected properly.

3

i found the solution.
First install CORE (you must select the “boot via bios” at the end
Second Upgrade from CORE to SCALE using the web UI

1 Like