New motherboard - no network interface

TrueNAS General
1

Hi,
I had to upgrade my motherboard (CPU & RAM) but I can’t get the network interface to show.
Old motherboard: ASRock EPC602D8A
New motherboard: ASRock Z690 Pro RS

When it boots up I see the Conosole Setup screen with
“The web interface could not be accessed. Please check network configuration.”

If I go to option 1, “Configure Network Interface”, it tells me to select an interface, but doesn’t present me with any.

If I go to the shell and run ifconfig, I only seem lo0 and pflog0, no actual nics.

When I run dmesg | grep -i network it returns
pci1: <network, ethernet> at device 0.0 (no driver attached)

And finally pciconv -lv shows the interface
none4@pic0:1:0:0
RTL8125 2.5GBE Controller

I’ve read RealTek isn’t great, so I’ll get a new NIC. But is there a way to get this running in the mean time? I’m heading on vacation on Monday and want to be able to stream from the server.

Thanks much!

2

Just needed to keep googling:

3

The changes in loader.conf survived a reboot, but it didn’t survive a system update.

Any tips?

4

Tunables.

5

If you’re using Core, Scale generally has better support for more hardware, being based on Linux