Hi every, I’m new in truenas system
i installed latest version of scale ElectricEel-24.10.1on old computer
MB:GIGABYTE Z370 HD3P
CPU: Intel i7-8700
Memory: CORSAIR Vengeance LPX 64GB DDR4 3200
OS drive: Samsung NVME SSD M.2 960 EVO 250GB
After i press shutdown truenas will be off but the PC still running (MB,fans) till i forced off this happened every time i want to shutdown system, i notice this message during shutdown process
Hope this information can help to identify the issue where and Thanks in advance for every HELP !
I have this same issue. z170 ASUS Pro Gaming Board, i3 6100 Skylake CPU, 16GB DDR4 RAM, Dual-Mirrored Boot 256GB SSDs & 4 - 4TB Seagate NAS Drives in RAIDz1. Trying to figure out the issue myself. Same screen and errors. ElectricEel and latest verison.
Same issue for me as well, spinning fans and failed unmount messages and all.
ugreen dxp6800 pro - Intel i5 1235U Alder Lake, 64GB DDR5, single 256GB boot NVMe, 4x 16TB Seagate drives in mirrors.
First happened after doing a fresh installation of 24.10.2, where it asks you to please eject your boot media and restart.
I was installing 24.10.2 on the same boot disk as my previous TrueNAS install.
My problem was solved by enable ErP ( Energy Efficient Power) in the power tab in MB BIOS settings ( for my case Gigabyte ).
My problem was solved by enabling ErP (Energy Efficient Power) in the Power tab of the motherboard BIOS settings (in my case, a Gigabyte motherboard).
After trying multiple solutions in TrueNAS without success, I decided to install Unraid, but I encountered the same power-on issue. I searched the Unraid forums and discovered that the problem was caused by the PSU automatically powering on the NAS. The solution was to enable ErP in the BIOS settings.
After applying this fix, I tried TrueNAS again, and it worked fine. However, the NAS only fully shuts down when selecting specific shutdown reasons, such as Hardware Change or certain other options—not all shutdown reasons result in a full shutdown.
