Just tried a manual update to 13.3 stable. Same things. It wont upgrade, still on 13.0-u6.1 ok Running MacOS using webgui. tried the update method through the gui. tried manual update through the webgui. In both cases the update proceeds, system reboots, and voila still stuck on u6.1. this is the…

Well actually a boot environment was created [Screenshot 2024-09-01 at 10.22.13 AM]

cleaned up boot env. set to u6.2, activated, reboot, and this is the result [Screenshot 2024-09-01 at 10.41.16 AM]

I would delete the 13.3 and 13.0, reboot and try the GUI to go to 13.0-U6.2 If it still fails, then make sure you have a saved config and replace the boot device.

[image] galt007: https://download.freenas.org/13.0/STABLE/latest/TrueNAS-13.0-U6.2-manual-update.tar This is the link for the manual update to 13.0-U6.2; unless you are purposefully doing a step by step update, you want the 13.3 one . [image] alecmascot: If it still fails, then make sure …

13.0-U6.2 is a valid jump point to SCALE, no need to go to 13.3

I think there might be either a MacOS or Chrome dependency going on here: Top line is config save using safari next line is config save using chrome. [Screenshot 2024-09-01 at 11.43.02 AM] Tried updating through the gui on safari - same results

So here’s what happened I fresh installed 13.3 onto 2 SSD drives. For whatever reason I could not get the machine to boot. It just sat there at a mount prompt. So i fresh installed onto the single NVME that came with the ix system. That booted. I loaded my saved config file. The system re-booted tw…

Sort of hijacking my own thread here. After upgrade core to 13.3, read all the migration caveats about migrating to Scale. My setup is simple and there wasnt anything for me to take care of. so Pushed the update button to 24.02 stable. Acted like it updated but im still on Core. See below. I also m…

Core wont upgrade to 13.0-u6.2 UPDATE

TrueNAS General

Davvo September 3, 2024, 8:15pm 18

MIRROR ≠ RAID. You do not use the word RAID in ZFS: it’s either MIRROR or RAIDZ (well, and dRAID for the cool kids).

Topic		Replies	Views
Recover pool after (failed) migration from TrueNAS Core to TrueNas Scale TrueNAS General SCALE , ZFS	18	962	September 8, 2024
Core / Scale on same hardware, different boot and pool disks TrueNAS General CORE , SCALE	20	698	October 31, 2024
Failed Core to Scale upgrade TrueNAS General CORE , SCALE , ZFS	5	854	April 24, 2024
New install of v24 or v25 for zfs 6-disk array built with v13 TrueNAS General CORE , ZFS	11	121	February 19, 2026
Boot disk fails, need help to recover config TrueNAS CORE TrueNAS General CORE	5	303	February 2, 2026

Core wont upgrade to 13.0-u6.2 UPDATE

Related topics