I just bought one and it plays perfectly. I am running on 25.10 RC1 … The only thing that does not show in the UI reports are temperature and SMART info, but from the command line you get everything so the chip let the smart info pass through.
See … I have 3x20TB in a Raidz1 and a seperate 18TB in Stripe
root@NUUK:/root# for d in /dev/sd[b-e]; do
echo “== $d ==”
smartctl -A $d | awk ‘/Temperature_Celsius|Airflow_Temperature_Cel/’
done
== /dev/sdb ==
190 Airflow_Temperature_Cel 0x0022 062 044 000 Old_age Always - 38 (Min/Max 30/38)
194 Temperature_Celsius 0x0022 038 056 000 Old_age Always - 38 (0 15 0 0 0)
== /dev/sdc ==
190 Airflow_Temperature_Cel 0x0022 058 042 000 Old_age Always - 42 (Min/Max 31/42)
194 Temperature_Celsius 0x0022 042 058 000 Old_age Always - 42 (0 15 0 0 0)
== /dev/sdd ==
190 Airflow_Temperature_Cel 0x0022 063 028 000 Old_age Always - 37 (Min/Max 36/39)
194 Temperature_Celsius 0x0022 037 072 000 Old_age Always - 37 (0 15 0 0 0)
== /dev/sde ==
190 Airflow_Temperature_Cel 0x0022 058 048 000 Old_age Always - 42 (Min/Max 28/42)
194 Temperature_Celsius 0x0022 042 050 000 Old_age Always - 42 (0 20 0 0 0