Looking for advice on a 6-bay diy build

So 1000€ for case/motherboard/RAM/PSU? Compact system?

Supermicro X10SDV-4C-TLN2F:
https://www.supermicro.com/en/products/motherboard/X10SDV-4C-TLN2F

Has a m.2 slot for a boot device, dual Intel 10 GbE, IPMI (with HTML5 IP-KVM), up to 128 GB RAM. Six SATA ports onboard, and a PCIe 3.0 x16 slot for a HBA if you need more.

About US$250. A 32GB RDIMM, US$60. The 45HomeLab HL8:
https://store.45homelab.com/configure/hl8

Pricey, but 8 bays in the most compact chassis I’ve seen. For some less-pricey (and less-compact) options, see other comments in this thread:

Or you can 3D-print your own:

or:

4 Likes