i changed the hba to hba 9400 8i since the oone i was used is 9361 which cannot be flashed to it mode and i have to use storcli command instead of sas3flah the problem still
@Farout @SmallBarky @neofusion
sudo storcli /c0 show
CLI Version = 007.2807.0000.0000 Dec 22, 2023
Operating system = Linux 6.6.44-production+truenas
Controller = 0
Status = Success
Description = None
Product Name = HBA 9400-8i
Serial Number = RRW8000000
SAS Address = 00000000r00g00k000
PCI Address = 00:00:10:00
System Time = 12/02/2024 00:33:08
FW Package Build = 24.00.00.00
FW Version = 24.00.00.00
BIOS Version = 09.47.00.00_24.00.00.00
NVDATA Version = 24.00.00.24
PSOC FW Version = 0x0001
PSOC Part Number = 05689
Driver Name = mpt3sas
Driver Version = 43.100.00.00
Bus Number = 0
Device Number = 16
Function Number = 0
Domain ID = 0
Vendor Id = 0x1000
Device Id = 0xAF
SubVendor Id = 0x1000
SubDevice Id = 0x3010
Board Name = HBA 9400-8i
Board Assembly = 00-00008-0000000
Board Tracer Number = 0000000
Security Protocol = None
Physical Drives = 7
PD LIST :
=======
---------------------------------------------------------------------------
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
---------------------------------------------------------------------------
0:1 3 JBOD - 931.512 GB SATA HDD - - 512B ST1000DM003-1SB102 -
0:2 2 JBOD - 698.636 GB SATA HDD - - 512B TOSHIBA MQ01ABD075 -
0:3 7 JBOD - 931.511 GB SATA HDD - - 512B ST1000DM003-1SB102 -
0:4 1 JBOD - 931.512 GB SATA HDD - - 512B ST31000524NS -
0:5 4 JBOD - 931.512 GB SATA HDD - - 512B ST1000DM010-2EP102 -
0:6 5 JBOD - 698.636 GB SATA HDD - - 512B TOSHIBA MQ01ABD075 -
0:7 6 JBOD - 698.636 GB SATA HDD - - 512B TOSHIBA MQ01ABD075 -
---------------------------------------------------------------------------
EID-Enclosure Device ID|Slt-Slot No|DID-Device ID|DG-DriveGroup
UGood-Unconfigured Good|UBad-Unconfigured Bad|Intf-Interface
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition
Requested Boot Drive = Not Set