Had some problems with my TrueNas instance and noticed it after about a day. From what I could tell, I had over allocated RAM and it was running in swap for a while and caused everything to go into ultra slow mode. Assume this state for a while caused issues with the pool. This is the current stat…

Ouch! You’re in serious risk of losing everything here. Please describe your hardware, and how all these disks are attached.

Dell R630XD Attached via a LSI Dell SAS 2008 Card going to 2 NetApp DS4243 Disk shelf’s Tops shelf is all 8TB drives: 6 x 8TB RaidZ2 x 4 Second / Bottom Shelf is my expansion shelf: 6 x 12TB RaidZ2 6 x 18TB RaidZ2 Truenas is running on Proxmox (I know that not preferred) with the LSI card pas…

Here are some reference photos of the setup I took when attempting to sell my old R620’s. There is one more row of HDD’s on the bottom now. [IMG_2606.HEIC] : [IMG_2604.HEIC]

Perhaps they aren’t that sensitive but did you mean to post a picture containing the service code for your device?

Only picture I had of it. As far as I am aware, Cant really do too much with a ST of a server who’s support ended in 2016. Plus its up for sale so the ST is out in with wild by this point.

Passing through a HBA used to be enough until this: [image] Can't import datapool TrueNAS General IIRC there is currently a bug / bad design decision in proxmox where it auto-imports zpools into the host OS. If the zpool is currently imported / in use in a guest as well th…

@Poetart does your Proxmox host OS show the pool under a zpool list or zpool status command? HBA passthrough should be enough to keep it separated (as both host and guest can’t simultaneously attach to the physical PCIe device) but I’d like to make sure it’s properly doing that and not using a raw d…

[Screenshot 2024-08-19 133707] Just showing my NVME array.

So no disk sharing, that’s a good start. I count 36 (6x6wZ2) drives in your zpool status but your hardware description only says 18x drives. [image] Poetart: This system was bare metal Freenas / Core that I migrated to Truenas Scale maybe 1-2 months ago from a R620. [image] Poetart: Top…

Tops self is 24 drives 6x4 Bottom shelf is 6 x 2 The 18TB drives are native SAS The rest are native sata using the Netapp SAS-SATA interposers that came with the shelf.

Pretty sure this is a recover from backup event but want a second opinion

TrueNAS General

Farout August 19, 2024, 6:23pm 8

Passing through a HBA used to be enough until this:

Now it is advised to blacklist the HBA aswell.

Topic		Replies	Views
TrueNAS Scale - Drive/Pool issues after power problems TrueNAS General	49	258	July 1, 2025
Cascading failures while replacing a drive in RAIDZ2 TrueNAS General CORE , Hardware , ZFS	8	172	November 6, 2025
Help! Shut down system to replace failed disk, now storage pool is not mounted TrueNAS General	32	293	March 28, 2026
Nervous to re-add existing drives to pool TrueNAS General SCALE , ZFS	15	222	June 30, 2025
Replaced a broken disk and having trouble resilvering TrueNAS General CORE	33	687	October 7, 2024

Pretty sure this is a recover from backup event but want a second opinion

Related topics