Hi everyone,
It’s my second topic on the same date.
After the first one, I’ve decided to move to scale.
But the update failed with the error :
Error: [EFAULT] Command [‘mount’, ‘-t’, ‘msdosfs’, ‘/dev/da0p1’, ‘/boot/efi’] failed with exit code 1: mount_msdosfs: /dev/da0p1: Read-only file system
I’ve 3x4To in Raid5
And an double boot-pool with an 120Go SSD and a USB Sandisk
Thx for your advices,
Update :
Manual test on Sandisk (boot-pool 1/2) :
Errors:
da0
smartctl failed for disk da0: smartctl 7.2 2021-09-14 r5236 [FreeBSD 13.1-RELEASE-p9 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org Read Device Identity failed: scsi error unsupported scsi opcode A mandatory SMART command failed: exiting. To continue, add one or more ‘-T permissive’ options.
Manual test on SSD (boot-pool 2/2) :
OK