Can't get my GPU to work in TrueNas :(

Hey Everyone, nice to meet y’all.

I recently started building a Homeserver so that I can host my Blu Rays in Jellyfin, but I quickly wan into some problems and I hope that you guys can help me out here.

I bought a used server with an Intel Xeon E3 1230 v3 on a Supermicro X10SLM-F Motherboard with 16GB of RAM. Then I also acquired a Intel Arc A310 so that Jellyfin has some GPU Power. I installed TrueNAS SCALE ElectricEel 24.10 on the machine, but I cant get it to recognise my GPU.

I checked in the Linux Shell if the GPU is there and there I can find the Arc A310

lspci -nn || grep VGA
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3 Processor DRAM Controller [8086:0c08] (rev 06)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06)
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05)
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
00:16.1 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #2 [8086:8c3b] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 05)
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5)
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d5)
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation C224 Series Chipset Family Server Standard SKU LPC Controller [8086:8c54] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 05)
01:00.0 PCI bridge [0604]: Intel Corporation Device [8086:4fa1] (rev 01)
02:01.0 PCI bridge [0604]: Intel Corporation Device [8086:4fa4]
02:04.0 PCI bridge [0604]: Intel Corporation Device [8086:4fa4]
03:00.0 VGA compatible controller [0300]: Intel Corporation DG2 [Arc A310] [8086:56a6] (rev 05)
04:00.0 Audio device [0403]: Intel Corporation DG2 Audio Controller [8086:4f92]
05:00.0 PCI bridge [0604]: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge [1a03:1150] (rev 03)
06:00.0 VGA compatible controller [0300]: ASPEED Technology, Inc. ASPEED Graphics Family [1a03:2000] (rev 30)
07:00.0 Ethernet controller [0200]: Intel Corporation I210 Gigabit Network Connection [8086:1533] (rev 03)

But when I look into the advanced Settings in TrueNas there is no option for isolated GPU.

The fan also sounds like it is restarting all the time.

Did someone here ran in a similar Problem?

Any help is Really appreciated <3

Are you saying the GPU is not available for selection when deploying the app, as per the docs that is where it should be selectable:

Systems with non-NVIDIA GPU devices do not show this option, but these GPUs are selectable in the app installation wizards in the Resources Configuration section for the app.