When I use this version, I observe on my router that the LACP for the NAS is always inactive. When I reboot, the router shows activity, but after a while it becomes inactive. Could this be a bug in the new version?
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp5s0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000
link/ether 00:e2:69:84:45:cf brd ff:ff:ff:ff:ff:ff
3: eno1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc fq_codel master bond0 state UP group default qlen 1000
link/ether 00:e2:69:84:45:cf brd ff:ff:ff:ff:ff:ff permaddr 00:e2:69:84:45:ce
altname enp0s31f6
4: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP group default qlen 1000
link/ether 00:e2:69:84:45:cf brd ff:ff:ff:ff:ff:ff
inet6 fe80::2e2:69ff:fe84:45cf/64 scope link
valid_lft forever preferred_lft forever
5: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 5e:2b:52:92:25:da brd ff:ff:ff:ff:ff:ff
inet 10.0.0.10/24 brd 10.0.0.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::9871:c7ff:fe75:69d8/64 scope link
valid_lft forever preferred_lft forever
ip route
default via 10.0.0.2 dev br0 proto static
10.0.0.0/24 dev br0 proto kernel scope link src 10.0.0.10
