Hi all, I recently changed my update train to Goldeye from Fangtooth, and I understand that Goldeye is the answer for running 5000-series Nvidia GPUs. I have a 5060 that I would like to use to mess arouund for a personal LLM. However, I can’t seem to get Truenas (Scale) to recognize it. nvidia-smi…

Maybe check your revision? Is this the issue? [image] NVIDIA Kernel Module Change in TrueNAS 25.10 - What This Means for You Announcements Yeah, I can’t repro this with my 5070Ti as a primary or secondary (to a Radeon) GPU unfortunately. Can you link to any…

If @inertiax1000 can see their GPU in nvidia-smi then it shouldn’t be the same fault as in the other thread where GSP firmware wouldn’t load, because the driver won’t even init in that case. Can I get a sudo lspci -k | grep -A4 -i nvidia please?

[image] Chris Peredun: sudo lspci -k | grep -A4 -i nvidia Here is the output: 01:00.0 VGA compatible controller: NVIDIA Corporation Device 2d04 (rev a1) Subsystem: ZOTAC International (MCO) Ltd. Device 1772 Kernel driver in use: vfio-pci Kernel modules: nouveau, nvidia_drm, nvidia 01:00.…

[image] inertiax1000: Kernel driver in use: vfio-pci Kernel modules: nouveau, nvidia_drm, nvidia Somehow not only is the passthrough vfio-pci driver still getting bound (you did uncheck it for isolation and reboot, yes?) but it’s also trying to bind nouveau which I was pretty sure we explicit…

Yeah I am a little confused as to what’s going on. Any suggestions to try?

Check System → Advanced → Kernel and make sure you aren’t somehow running the debug kernel.

My setting: Enable Debug Kernel:Disabled

well there goes the easy fix The nouveau driver should be way out of the way as it’s blacklisted from loading in our modprobe directory, so something’s up entirely outside the domain of that. Did you install your 5060 before or after the upgrade from 25.04 to 25.10, and can you attach the file /va…

I installed it before the upgrade. Perhaps uninstall and reinstall now that I have changed trains? Standby for the log.

[image] inertiax1000: Perhaps uninstall and reinstall now that I have changed trains? Standby for the log. I’m thinking something in 25.04 decided to fuse it to vfio-pci for whatever reason and that’s stuck in the kernel params. Once you get the installer.log let’s see these (with sudo as ne…

Nvidia 5060 Not Working While Using Goldeye 25.10.1

TrueNAS General

SmallBarky January 20, 2026, 2:04pm 2

Maybe check your revision? Is this the issue?

Topic		Replies	Views
Nvidia gpu drivers not loading? or Gpu not loading correctly Apps and Virtualization Apps , NVIDIA , GPU	16	154	August 12, 2026
Latest Nvidia drivers TrueNAS General SCALE , Question , Feature-Request	38	7713	October 17, 2025
NVIDIA Kernel Module Change in TrueNAS 25.10 - What This Means for You Announcements NVIDIA , GPU	130	10363	July 31, 2026
Nvidia Drivers checkbox missing TrueNAS General SCALE , Hardware	8	154	May 12, 2026
TrueNAS Scale and RTL8125 rev 0c TrueNAS General Networking , Hardware	24	2119	September 26, 2026

Nvidia 5060 Not Working While Using Goldeye 25.10.1

Related topics