Power failure while zpool expand was running

My zpool was running an expansion and the power went out. Now when I boot, I get a busybox screen with the error, “cannot import ‘boot-pool’ : one or more devices is off line.” Anyone have any suggestions?

Thanks,

Do you have a backup of the config?
If so then just figure out whats wrong with the boot pool, fix, reinstall and upload the config

If not - can you list your hardware please

OS version may help, too.

I actually do have a backup as I just applied the latest update earlier today. I’m not sure I know how to figure out what’s wrong with the boot pool. I get the below errors on boot.

My hard ware is Supermicro x10scm-f, 32gb ECC, with an LSI 9400 controller and 8 Exos 4TB drives.

So - you are booting off a Exos 8TB HDD?

Sorry, boot drive is a 2.5" SATA HD 125gb.

Then I would test that - as that appears to have failed in some manner