Hello 
So i’ve been trying to get my new little setup going, but am running into a strange problem. I’ve gone from Core to Scale, added a HBA card and gotten myself 8x 4tb disks
Doing sas2ircu I get this. In bios the card is reporting the size and so are the shell smart readout. I can use the shell to run health tests, so what gives? I know i’ve messed up something, but I don’t know where to start
LSI Corporation SAS2 IR Configuration Utility.
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved.
Read configuration has been initiated for controller 0
------------------------------------------------------------------------
Controller information
------------------------------------------------------------------------
Controller type : SAS2008
BIOS version : 7.39.02.00
Firmware version : 20.00.07.00
Channel description : 1 Serial Attached SCSI
Initiator ID : 0
Maximum physical devices : 255
Concurrent commands supported : 3432
Slot : 4
Segment : 0
Bus : 3
Device : 0
Function : 0
RAID Support : No
------------------------------------------------------------------------
IR Volume information
------------------------------------------------------------------------
------------------------------------------------------------------------
Physical device information
------------------------------------------------------------------------
Initiator at ID #0
Device is a Hard disk
Enclosure # : 1
Slot # : 0
SAS Address : 5000c50-0-6334-65c1
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7PLVZ
GUID : 5000c500633465c3
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 1
SAS Address : 5000c50-0-6336-0005
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7Q10M
GUID : 5000c50063360007
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 2
SAS Address : 5000c50-0-6332-e089
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7NYK7
GUID : 5000c5006332e08b
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 3
SAS Address : 5000c50-0-6334-6931
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7PLP7
GUID : 5000c50063346933
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 4
SAS Address : 5000c50-0-6333-7a3d
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7PTJX
GUID : 5000c50063337a3f
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 5
SAS Address : 5000c50-0-6332-e7b5
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7NYEB
GUID : 5000c5006332e7b7
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 6
SAS Address : 5000c50-0-633a-1335
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7R84T
GUID : 5000c500633a1337
Protocol : SAS
Drive Type : SAS_HDD
Device is a Hard disk
Enclosure # : 1
Slot # : 7
SAS Address : 5000c50-0-6334-632d
State : Available (AVL)
Size (in MB)/(in sectors) : ???/???
Available (AVL)
Manufacturer : SEAGATE
Model Number : DKS2E-H4R0SS
Firmware Revision : 7FA5
Serial No : Z1Z7PLXY
GUID : 5000c5006334632f
Protocol : SAS
Drive Type : SAS_HDD
------------------------------------------------------------------------
Enclosure information
------------------------------------------------------------------------
Enclosure# : 1
Logical ID : 56c92bf0:0004a8de
Numslots : 8
StartSlot : 0
------------------------------------------------------------------------
SAS2IRCU: Command DISPLAY Completed Successfully.
SAS2IRCU: Utility Completed Successfully.
root@truenas[~]# smartctl -a /dev/sda
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.32-production+truenas] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: SEAGATE
Product: DKS2E-H4R0SS
Revision: 7FA5
Compliance: SPC-3
User Capacity: 3,977,333,347,520 bytes [3.97 TB]
Logical block size: 520 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000c50063346933
Serial number: Z1Z7PLP70000C5261RNX
Device type: disk
Transport protocol: SAS (SPL-4)
Local Time is: Fri Nov 1 01:01:33 2024 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 42 C
Drive Trip Temperature: 68 C
Accumulated power on time, hours:minutes 152:08
Manufactured in week 02 of year 2015
Specified cycle count over device lifetime: 10000
Accumulated start-stop cycles: 265
Specified load-unload count over device lifetime: 300000
Accumulated load-unload cycles: 282
Elements in grown defect list: 0
Vendor (Seagate Cache) information
Blocks sent to initiator = 145802516
Blocks received from initiator = 211278058
Blocks read from cache and sent to initiator = 0
Number of read and write commands whose size <= segment size = 4109525
Number of read and write commands whose size > segment size = 0
Vendor (Seagate/Hitachi) factory information
number of hours powered up = 152.13
number of minutes until next internal SMART test = 27
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 303684071 0 0 303684071 0 75.817 0
write: 0 0 0 0 0 133.430 0
verify: 506063 0 0 506063 0 0.000 0
Non-medium error count: 25
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Completed - 151 - [- - -]
Long (extended) Self-test duration: 14 seconds [0.2 minutes]