The dashboard says 1 drive is offline, but it looks like 3 are having issues (sde, sdg, sdm). I have cold spares, so I figured I’d swap out the one that’s offline first, then let it rebuild, then tackle the next problems.
Bu I don’t see which drive is offline.
Image upload isn’t working. Color me surprised that this terrible forum software doesn’t work. :-/
I guess there’s no way to edit a post to get rid of a typoe. The dashboard says 1 disk has errors, and the notifications say:
Critical
Device: /dev/sdg [SAT], ATA error count increased from 0 to 1.
2024-12-29 00:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdm [SAT], ATA error count increased from 1 to 149.
2024-12-29 00:18:14 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sde [SAT], 8 Currently unreadable (pending) sectors.
2024-12-31 14:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sde [SAT], 8 Offline uncorrectable sectors.
2024-12-31 14:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdg [SAT], 1 Currently unreadable (pending) sectors.
2025-01-07 21:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdg [SAT], ATA error count increased from 1 to 8.
2025-01-07 21:18:13 (America/Los_Angeles)
Dismiss
Open a shell and run:
sudo zpool status
That should tell you which drive is offline.
Also, all those drives having issues at the same time feels like a controller error, odd for every drive to be having issues.
I have 14 drives. It is strange that 3 are having an issue, but that’s not all of the drives.
There’s no way to do it in the web gui???
It says no errors and all the drives are online. Why would the web UI and the command line disagree???
I can’t copy out of the web based CLI, and I can’t upload a screenshot, so there’s that too.
The web UI for zpool says the same thing as the CLI.
Notifications say this:
Critical
Device: /dev/sdg [SAT], ATA error count increased from 0 to 1.
2024-12-29 00:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdm [SAT], ATA error count increased from 1 to 149.
2024-12-29 00:18:14 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sde [SAT], 8 Currently unreadable (pending) sectors.
2024-12-31 14:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sde [SAT], 8 Offline uncorrectable sectors.
2024-12-31 14:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdg [SAT], 1 Currently unreadable (pending) sectors.
2025-01-07 21:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdg [SAT], ATA error count increased from 1 to 8.
2025-01-07 21:18:13 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdo [SAT], 5 Currently unreadable (pending) sectors (changed +4).
2025-01-10 08:04:44 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdo [SAT], ATA error count increased from 8 to 13.
2025-01-10 08:04:44 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdi [SAT], 8 Currently unreadable (pending) sectors.
2025-01-10 08:04:44 (America/Los_Angeles)
Dismiss
cancel
Critical
Device: /dev/sdi [SAT], 8 Offline uncorrectable sectors.
2025-01-10 08:04:44 (America/Los_Angeles)
Dismiss
notifications_active
Info
Scrub of pool ‘zPool’ finished.
2024-12-29 04:44:18 (America/Los_Angeles)
Dismiss
notifications_active
Info
Scrub of pool ‘boot-pool’ finished.
2025-01-09 03:45:09 (America/Los_Angeles)
Dismiss
notifications_active
Info
Scrub of pool ‘boot-pool’ started.
2025-01-09 03:45:01 (America/Los_Angeles)
Dismiss
Can you please run the following commands in a shell (System Settings / Shell) and post the output here with the output of each command in a separate </> box:
lsblk -bo NAME,MODEL,ROTA,PTTYPE,TYPE,START,SIZE,PARTTYPENAME,PARTUUIDlspcisudo sas2flash -listsudo sas3flash -listsudo zpool status -vThank you. With this detailed diagnostic information we will have a chance to work out what the problem is and what the cause is.
P.S. Please put your signature in a concertina like in my signature so we don’t have to keep scrolling past reams of duplicated signature.
I tamed my sig, but idk how to make a concertina.
Like I just said, I can’t copy out of the interface, idk why. CTRL + INS + C doesn’t copy the text.
I enabled SSH, but PuTTY is having a weird response. As soon as I enter the username, it errors out and mentions a key, which I’ve never seen PuTTY do before.
The SSH credentials in Backup Credentials > SSH Connections looks like an outbound connection, presumably meant for backing up data or something. Not the local SSH server for incoming connections.
How many posts do I have to make before I can upload a screenshot?
[details=Summary line]
Put your details here
[/details]Just use the Shell in the UI under System Settings (with the cog symbol)
IS THERE SOME REASON YOU ARE IGNORING ME WHEN I TELL YOU THAT I CAN’T GET INFORMATION OUT OF THE WEB GUI?
I got SSH working. However, Truenas, PuTTY, and forum metadata DO NOT play nice. The SSH client in PowerShell worked fine. I couldn’t find any others on the internet.
I think I got these in the same order as you requested them:
admin@truenas[~]$ lsblk -bo NAME,MODEL,ROTA,PTTYPE,TYPE,START,SIZE,PARTTYPENAME,PARTUUID
NAME MODEL ROTA PTTYPE TYPE START SIZE PARTTYPENAME PARTUUID
sda WDC WUH 1 gpt disk 14000519643136
└─sda1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 5d64fc93-6e46-48d4-b69e-d94d9dceb84csdb WDC WUH 1 gpt disk 14000519643136
└─sdb1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 25ec455c-a629-4300-b16d-09deaa3a88a0sdc TOSHIBA 1 gpt disk 14000519643136
└─sdc1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 0278dd80-3622-46b5-8a8f-4fa4b6b6142bsdd TOSHIBA 1 gpt disk 14000519643136
└─sdd1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 41644b00-0499-4742-9d4e-a8e76f823d61sde WDC WUH 1 gpt disk 14000519643136
└─sde1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 1851ae7d-b04d-4ce7-a718-5a8aefbcbb2bsdf WDC WUH 1 gpt disk 14000519643136
└─sdf1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 8c7742ef-a8a0-4dc3-b974-316e43d8a15asdg TOSHIBA 1 gpt disk 14000519643136
└─sdg1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 6406fd6a-053c-4195-babe-f088281483f8sdh TOSHIBA 1 gpt disk 14000519643136
└─sdh1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS c9e772ad-f118-4e92-b5bd-c872033b71a1sdi WDC WUH 1 gpt disk 14000519643136
└─sdi1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS dbcd4be4-2531-454e-ae32-ef388712df7asdj TOSHIBA 1 gpt disk 14000519643136
└─sdj1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 176b57a1-a3bc-4bc2-b1ce-390c2d4da6c8sdk SanDisk 0 gpt disk 128035676160
├─sdk1 0 gpt part 4096 1048576 BIOS boot f1eb4c83-ddc8-45bc-b59a-5909fba158b5├─sdk2 0 gpt part 6144 536870912 EFI System 84d5455d-9b3d-4d74-a64a-df269a20e05c├─sdk3 0 gpt part 34609152 110315773440 Solaris /usr & Apple ZFS 6ecbfa39-b644-4021-bcaa-5c7e684f174d└─sdk4 0 gpt part 1054720 17179869184 Linux swap 646e196c-7554-4fbe-8f45-45f26bdf5938 └─sdk4 0 crypt 17179869184
sdl WDC WUH 1 gpt disk 14000519643136
└─sdl1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS b6014162-d311-47ac-b63c-6e6a72c4f07fsdm TOSHIBA 1 gpt disk 14000519643136
└─sdm1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 5fc7e2f4-0dde-4895-8f1a-432ca652f35esdn WDC WUH 1 gpt disk 14000519643136
└─sdn1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS 1a4e3a70-25d0-4c61-91bd-9f76014d1ae3sdo WDC WUH 1 disk 14000519643136
└─sdo1 1 part 4096 14000516501504 59d09ab8-9597-4f79-be46-6e770e16dd34aaaadadadadmadmadmiadadmiadmiadmiadmadmadmiadadmadmiadadadadmadmaadadminadmadmiadmadmadmaadmaadadaaadadaadaaadaaaaadaaaaaaaaaaaaaaaadmin@truenas[~]$
admin@truenas[~]$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne IOMMU
00:01.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:01.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe GPP Bridge
00:01.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne PCIe GPP Bridge
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Renoir PCIe Dummy Host Bridge
00:08.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:08.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Renoir Internal PCIe GPP Bridge to Bus
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 51)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 51)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 5
00:18.6 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 6
00:18.7 Host bridge: Advanced Micro Devices, Inc. [AMD] Cezanne Data Fabric; Function 7
01:00.0 Serial Attached SCSI controller: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03)
02:00.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse Switch Upstream
03:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:03.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:08.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
03:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Matisse PCIe GPP Bridge
04:00.0 USB controller: ASMedia Technology Inc. Device 3241
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)
06:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Starship/Matisse Reserved SPP
06:00.1 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
06:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Matisse USB 3.0 Host Controller
07:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
08:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 51)
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Vega Mobile Series] (rev c9)
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Renoir Radeon High Definition Audio Controller
09:00.2 Encryption controller: Advanced Micro Devices, Inc. [AMD] Family 17h (Models 10h-1fh) Platform Security Processor
09:00.3 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
09:00.4 USB controller: Advanced Micro Devices, Inc. [AMD] Renoir/Cezanne USB 3.1
09:00.6 Audio device: Advanced Micro Devices, Inc. [AMD] Family 17h/19h HD Audio Controller
0a:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
0a:00.1 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 81)
admin@truenas[~]$ sudo sas2flash -list
[sudo] password for admin:
LSI Corporation SAS2 Flash Utility
Version 20.00.00.00 (2014.09.18)
Copyright (c) 2008-2014 LSI Corporation. All rights reserved
Adapter Selected is a LSI SAS: SAS2008(B2)
Controller Number : 0
Controller : SAS2008(B2)
PCI Address : 00:01:00:00
SAS Address : 5003005-7-01a8-08b0
NVDATA Version (Default) : 14.01.00.08
NVDATA Version (Persistent) : 14.01.00.08
Firmware Product ID : 0x2213 (IT)
Firmware Version : 20.00.07.00
NVDATA Vendor : LSI
NVDATA Product ID : SAS9211-8i
BIOS Version : 07.39.02.00
UEFI BSD Version : 07.27.01.01
FCODE Version : N/A
Board Name : SAS9211-8i
Board Assembly : ARTofSERVER
Board Tracer Number : N/A
Finished Processing Commands Successfully.
Exiting SAS2Flash.
admin@truenas[~]$ sudo sas3flash -list
[sudo] password for admin:
Avago Technologies SAS3 Flash Utility
Version 16.00.00.00 (2017.05.02)
Copyright 2008-2017 Avago Technologies. All rights reserved.
No Avago SAS adapters found! Limited Command Set Available!
ERROR: Command Not allowed without an adapter!
ERROR: Couldn't Create Command -list
Exiting Program.
admin@truenas[~]$ sudo zpool status -v
pool: boot-pool
state: ONLINE
scan: scrub repaired 0B in 00:00:08 with 0 errors on Thu Jan 9 06:45:09 2025
config:
NAME STATE READ WRITE CKSUM
boot-pool ONLINE 0 0 0
sdk3 ONLINE 0 0 0
errors: No known data errors
pool: zPool
state: ONLINE
scan: scrub repaired 0B in 04:44:14 with 0 errors on Sun Dec 29 07:44:18 2024
config:
NAME STATE READ WRITE CKSUM
zPool ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
1851ae7d-b04d-4ce7-a718-5a8aefbcbb2b ONLINE 0 0 0
0278dd80-3622-46b5-8a8f-4fa4b6b6142b ONLINE 0 0 0
25ec455c-a629-4300-b16d-09deaa3a88a0 ONLINE 0 0 0
c9e772ad-f118-4e92-b5bd-c872033b71a1 ONLINE 0 0 0
176b57a1-a3bc-4bc2-b1ce-390c2d4da6c8 ONLINE 0 0 0
8c7742ef-a8a0-4dc3-b974-316e43d8a15a ONLINE 0 0 0
41644b00-0499-4742-9d4e-a8e76f823d61 ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
5d64fc93-6e46-48d4-b69e-d94d9dceb84c ONLINE 0 0 0
6406fd6a-053c-4195-babe-f088281483f8 ONLINE 0 0 0
5fc7e2f4-0dde-4895-8f1a-432ca652f35e ONLINE 0 0 0
b6014162-d311-47ac-b63c-6e6a72c4f07f ONLINE 0 0 0
1a4e3a70-25d0-4c61-91bd-9f76014d1ae3 ONLINE 0 0 0
59d09ab8-9597-4f79-be46-6e770e16dd34 ONLINE 0 0 0
dbcd4be4-2531-454e-ae32-ef388712df7a ONLINE 0 0 0
errors: No known data errors
Looking over this data, I don’t see much of anything useful, and it completely contradicts the notifications that are complaining of issues.
The errors you mentioned in your initial posts are SMART errors and you haven’t posted the smart reports.
Run sudo smartctl -a /dev/sdX on each drive.
Replace X with the corresponding device name (/dev/sda, /dev/sdb, and so on).
To clarify, I say each drive intentionally, since it’s been more than a week since those errors were generated, there’s a fair chance you rebooted your server. When you do that the device names can move around so suddenly sda (and so on) refers to a different disk than it used to.
I’ll add that your lsblk is almost nonsensical, not sure what happened there but maybe the formatting broke it, the NAME column makes that apparent.
Yeah, I took the server down the other day, moved it to my workbench, and fired it up last night. I have 2 cold standby drives and was trying to figure out which drives I need to swap out.
“Run these random commands for random/no reason” is getting old though, what are your commands supposed to do and why are we running them?
lsblk looks fine to me, just says the drives are online though, which the web GUI also says.
You said you couldn’t see any errors in your previously assembled and posted data.
Since the alerts refer to SMART errors, running smartctl will let you identify which disks are the actual drives that are running into issues. It will uniquely do so by also showing you the serial number, lessening the risk of you pulling the wrong drives, if it comes to that.
smartctl is a basic tool.
Google it if you want to see sample output so you can make an informed choice of if it will be helpful or not.
This is what the lsblk should have looked like, if it was formatted correctly.
Especially note the dashes at the beginning of each row denoting each device and clearly letting you see any partitions. Your post does not look like that. In fact it suggests that sda1, sdb1, sdc1 and so on are all partitions of sda. That is nonsensical.
% lsblk -bo NAME,MODEL,ROTA,PTTYPE,TYPE,START,SIZE,PARTTYPENAME,PARTUUID
NAME MODEL ROTA PTTYPE TYPE START SIZE PARTTYPENAME PARTUUID
sda TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sda1 1 gpt part 128 2147418624 Linux swap ce373728-6e01-4a81-ab39-ab4690cc2934
│ └─md127 1 raid1 2145320960
│ └─md127 1 crypt 2145320960
└─sda2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS 102863d2-f629-4a97-b24d-1ba9750cbe8c
sdb TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdb1 1 gpt part 128 2147418624 Linux swap 93444cbc-a748-4417-a17e-77dfabdcb5fd
│ └─md124 1 raid1 2145320960
│ └─md124 1 crypt 2145320960
└─sdb2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS 886b9e9c-dc83-41ec-922c-2ebb2ce9fc2e
sdc TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdc1 1 gpt part 128 2147418624 Linux swap 25b211ef-517f-4e6d-91c6-43eb69810680
│ └─md124 1 raid1 2145320960
│ └─md124 1 crypt 2145320960
└─sdc2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS b162e6ac-15ec-4bfd-b7ee-504dcc4a7ed2
sdd TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdd1 1 gpt part 128 2147418624 Linux swap a9758214-1b31-4c8b-a68d-753a3ecf1d9a
│ └─md124 1 raid1 2145320960
│ └─md124 1 crypt 2145320960
└─sdd2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS 51de2c11-2c4b-406c-a51a-30419d7349f8
sde TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sde1 1 gpt part 128 2147418624 Linux swap 607087a4-4ab1-48f2-b7d6-44fad514f5f0
│ └─md127 1 raid1 2145320960
│ └─md127 1 crypt 2145320960
└─sde2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS d0128e36-a1ff-41b9-b401-e0b8d0007209
sdf Samsung SSD 870 EVO 4TB 0 gpt disk 4000787030016
├─sdf1 0 gpt part 128 2147418624 Linux swap 3949722c-1119-4c56-ba67-a4ae8fb434a1
│ └─md126 0 raid1 2145320960
│ └─md126 0 crypt 2145320960
└─sdf2 0 gpt part 4194432 3998639463936 Solaris /usr & Apple ZFS cd4db217-58f9-45d3-8b28-f18a88940b0e
sdg Samsung SSD 850 EVO 500GB 0 gpt disk 500107862016
├─sdg1 0 gpt part 128 2147418624 Linux swap 30bd6f17-d3cf-40b1-ac29-eb6c9e916c44
│ └─md126 0 raid1 2145320960
│ └─md126 0 crypt 2145320960
└─sdg2 0 gpt part 4194432 497960295936 Solaris /usr & Apple ZFS d183bbea-3039-40a1-a4fd-fac5c2f63409
sdh Samsung SSD 850 EVO 500GB 0 gpt disk 500107862016
├─sdh1 0 gpt part 128 2147418624 Linux swap 1e7b0527-8847-4531-89b0-72c191fe1546
│ └─md126 0 raid1 2145320960
│ └─md126 0 crypt 2145320960
└─sdh2 0 gpt part 4194432 497960295936 Solaris /usr & Apple ZFS d10851f3-2073-489a-8c84-f25b21ccbe8e
sdi TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdi1 1 gpt part 128 2147418624 Linux swap 74bacaf2-9741-4ad9-9553-9209d98f5567
│ └─md125 1 raid1 2145320960
│ └─md125 1 crypt 2145320960
└─sdi2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS f6c21b17-94ea-4ec5-8c1d-34cebbd30a84
sdj Samsung SSD 870 EVO 4TB 0 gpt disk 4000787030016
├─sdj1 0 gpt part 128 2147418624 Linux swap 3770da47-a1cf-4241-a622-2c0d19d640d1
│ └─md127 1 raid1 2145320960
│ └─md127 1 crypt 2145320960
└─sdj2 0 gpt part 4194432 3998639463936 Solaris /usr & Apple ZFS e892aeae-d461-4efd-a482-ec1efee4c125
sdk TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdk1 1 gpt part 128 2147418624 Linux swap df06af8d-16e3-424c-b270-44dddbd10957
│ └─md125 1 raid1 2145320960
│ └─md125 1 crypt 2145320960
└─sdk2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS 1fe48be2-df53-4deb-a374-2742b2fe59d8
sdl Samsung SSD 850 PRO 128GB 0 disk 128035676160
sdm TOSHIBA MG09ACA18TE 1 gpt disk 18000207937536
├─sdm1 1 gpt part 128 2147418624 Linux swap b95e958f-747e-48af-8581-3485033e0e39
│ └─md125 1 raid1 2145320960
│ └─md125 1 crypt 2145320960
└─sdm2 1 gpt part 4194432 17998060371456 Solaris /usr & Apple ZFS bad53db8-a22c-41d8-97fb-ad3192082e14
sdn SuperMicro SSD 0 disk 31675383808
sdo Samsung SSD 850 PRO 128GB 0 gpt disk 128035676160
├─sdo1 0 gpt part 4096 1048576 BIOS boot 605cee57-25da-481e-9737-2f2f16e58d25
├─sdo2 0 gpt part 6144 536870912 EFI System 45b75913-4911-4cb2-b244-59056a39e6ab
└─sdo3 0 gpt part 1054720 127495642624 Solaris /usr & Apple ZFS 9abb11c3-74d1-479e-b992-33eada081798
sdp SuperMicro SSD 0 disk 31675383808
nvme1n1 INTEL SSDPEK1A118GA 0 gpt disk 118410444800
└─nvme1n1p1 0 gpt part 40 118410407424 Solaris /usr & Apple ZFS 5923f15f-cbad-4e19-b9fa-83d7d8808c61
nvme0n1 INTEL SSDPEK1A118GA 0 gpt disk 118410444800
└─nvme0n1p1 0 gpt part 40 118410407424 Solaris
admin@truenas[~]$ sudo smartctl -a /dev/sda
[sudo] password for admin:
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC530
Device Model: WDC WUH721414ALE604
Serial Number: 9JHDHHLT
LU WWN Device Id: 5 000cca 258d3c627
Firmware Version: LDGSW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:55:33 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1492) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 384 (Average 381)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 42205
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 18
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1749
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1749
194 Temperature_Celsius 0x0002 060 060 000 Old_age Always - 34 (Min/Max 15/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 35044 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC530
Device Model: WDC WUH721414ALE604
Serial Number: 9JGJ0WVT
LU WWN Device Id: 5 000cca 258c7494f
Firmware Version: LDGSW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:56:47 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1465) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 391 (Average 390)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 26
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 45408
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1878
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1878
194 Temperature_Celsius 0x0002 060 060 000 Old_age Always - 34 (Min/Max 17/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 37635 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdc
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y840A0AJFFHG
LU WWN Device Id: 5 000039 908c87eaf
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:57:21 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1382) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 7818
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 21
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 40484
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 20
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 100
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 15/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 1835021
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37205
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 591
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 30907 hours (1287 days + 19 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 51 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e5 00 00 00 00 00 00 00 00:07:16.406 CHECK POWER MODE
b4 11 00 70 79 72 00 00 00:07:13.679 SANITIZE DEVICE
e5 00 00 00 00 00 00 00 00:07:13.679 CHECK POWER MODE
b4 00 00 01 00 00 00 00 00:07:13.678 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:07:13.678 SANITIZE DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 26455 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdd
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y810A05JFFHG
LU WWN Device Id: 5 000039 908c80dec
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:57:57 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1386) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 7839
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 41290
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 24
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 227
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 31 (Min/Max 15/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 18481158
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37508
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 590
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 31713 hours (1321 days + 9 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e5 00 00 00 00 00 00 00 00:14:26.905 CHECK POWER MODE
b4 11 00 70 79 72 00 00 00:14:24.236 SANITIZE DEVICE
e5 00 00 00 00 00 00 00 00:14:24.236 CHECK POWER MODE
b4 00 00 01 00 00 00 00 00:14:24.235 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:14:24.235 SANITIZE DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27538 -
# 2 Short offline Completed without error 00% 18630 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sde
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC530
Device Model: WDC WUH721414ALE604
Serial Number: 9JHMBEJT
LU WWN Device Id: 5 000cca 258d6e57c
Firmware Version: LDGSW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:58:21 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1380) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 390 (Average 388)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 34
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 43047
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 25
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1557
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1557
194 Temperature_Celsius 0x0002 062 062 000 Old_age Always - 33 (Min/Max 17/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 35272 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdf
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Ultrastar DC HC530
Device Model: WDC WUH721414ALE604
Serial Number: 9JGJ3UJT
LU WWN Device Id: 5 000cca 258c7544a
Firmware Version: LDGSW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:59:19 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1462) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 386 (Average 383)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 30
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 094 094 000 Old_age Always - 44228
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 1658
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 1658
194 Temperature_Celsius 0x0002 058 058 000 Old_age Always - 36 (Min/Max 17/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 36500 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdg
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y880A0C1FFHG
LU WWN Device Id: 5 000039 908c8d22e
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 13:59:58 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1380) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8038
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 41498
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 225
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 31 (Min/Max 16/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 17170438
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37535
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 590
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 31921 hours (1330 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e5 00 00 00 00 00 00 00 00:02:54.046 CHECK POWER MODE
b4 11 00 70 79 72 00 00 00:02:51.421 SANITIZE DEVICE
e5 00 00 00 00 00 00 00 00:02:51.421 CHECK POWER MODE
b4 00 00 01 00 00 00 00 00:02:51.420 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:02:51.420 SANITIZE DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27518 -
# 2 Short offline Completed without error 00% 18629 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ sudo smartctl -a /dev/sdh
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y890A08UFFHG
LU WWN Device Id: 5 000039 908c8db37
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:26 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1378) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8041
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 37
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 41023
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 34
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 201
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 15/41)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 69206024
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37398
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 591
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27264 -
# 2 Short offline Completed without error 00% 18419 -
# 3 Short offline Completed without error 00% 18353 -
# 4 Short offline Completed without error 00% 18353 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdi
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WUH721414ALN6L4
Serial Number: 9RH9DH5C
LU WWN Device Id: 5 000cca 264d25dba
Firmware Version: LDGNW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Size: 4096 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:29 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1425) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 383 (Average 382)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11334
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 485
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 485
194 Temperature_Celsius 0x0002 060 060 000 Old_age Always - 34 (Min/Max 17/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdj
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y880A07TFFHG
LU WWN Device Id: 5 000039 908c8cec4
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:32 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1381) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 7857
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 41290
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 24
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 226
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 33 (Min/Max 15/42)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 148
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 85721093
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37503
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 592
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 149 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 149 occurred at disk power-on lifetime: 41012 hours (1708 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 00 f7 17 46 40 Error: ICRC, ABRT at LBA = 0x004617f7 = 4593655
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f0 10 e8 1f 46 40 00 35d+10:26:02.388 READ FPDMA QUEUED
60 f0 08 f8 17 46 40 00 35d+10:26:02.384 READ FPDMA QUEUED
60 e8 00 10 10 46 40 00 35d+10:26:02.384 READ FPDMA QUEUED
60 e8 10 20 08 46 40 00 35d+10:26:02.329 READ FPDMA QUEUED
60 f0 08 30 00 46 40 00 35d+10:26:02.327 READ FPDMA QUEUED
Error 148 occurred at disk power-on lifetime: 41012 hours (1708 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 08 bf c2 eb 40 Error: ICRC, ABRT at LBA = 0x00ebc2bf = 15450815
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f0 00 c0 c2 eb 40 00 35d+10:25:54.090 READ FPDMA QUEUED
60 e8 08 d8 ba eb 40 00 35d+10:25:54.086 READ FPDMA QUEUED
60 e8 00 e8 b2 eb 40 00 35d+10:25:54.082 READ FPDMA QUEUED
60 f0 08 f8 aa eb 40 00 35d+10:25:54.078 READ FPDMA QUEUED
60 f0 00 08 a3 eb 40 00 35d+10:25:54.074 READ FPDMA QUEUED
Error 147 occurred at disk power-on lifetime: 41012 hours (1708 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 10 c7 1c b4 40 Error: ICRC, ABRT at LBA = 0x00b41cc7 = 11803847
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 80 10 48 15 b4 40 00 35d+10:25:50.898 READ FPDMA QUEUED
60 38 08 10 15 b4 40 00 35d+10:25:50.898 READ FPDMA QUEUED
60 38 00 d8 14 b4 40 00 35d+10:25:50.898 READ FPDMA QUEUED
60 80 10 58 0d b4 40 00 35d+10:25:50.894 READ FPDMA QUEUED
60 30 08 28 0d b4 40 00 35d+10:25:50.894 READ FPDMA QUEUED
Error 146 occurred at disk power-on lifetime: 41012 hours (1708 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 08 ff ac aa 40 Error: ICRC, ABRT at LBA = 0x00aaacff = 11185407
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f0 00 00 ad aa 40 00 35d+10:25:48.873 READ FPDMA QUEUED
60 e8 08 18 a5 aa 40 00 35d+10:25:48.870 READ FPDMA QUEUED
60 e8 00 28 9d aa 40 00 35d+10:25:48.866 READ FPDMA QUEUED
60 f0 08 38 95 aa 40 00 35d+10:25:48.862 READ FPDMA QUEUED
60 f0 00 48 8d aa 40 00 35d+10:25:48.858 READ FPDMA QUEUED
Error 145 occurred at disk power-on lifetime: 41012 hours (1708 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 41 08 47 23 a1 40 Error: ICRC, ABRT at LBA = 0x00a12347 = 10560327
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 f0 00 38 2b a1 40 00 35d+10:25:46.960 READ FPDMA QUEUED
60 e8 10 50 23 a1 40 00 35d+10:25:46.956 READ FPDMA QUEUED
60 e8 08 60 1b a1 40 00 35d+10:25:46.956 READ FPDMA QUEUED
60 f0 00 70 13 a1 40 00 35d+10:25:46.948 READ FPDMA QUEUED
60 e8 08 88 0b a1 40 00 35d+10:25:46.944 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27552 -
# 2 Short offline Completed without error 00% 18629 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdl
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WUH721414ALN6L4
Serial Number: 9RHUA20C
LU WWN Device Id: 5 000cca 264d99a90
Firmware Version: LDGNW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Size: 4096 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:36 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1560) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 65536
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 382 (Average 381)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 3
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11333
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 488
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 488
194 Temperature_Celsius 0x0002 057 057 000 Old_age Always - 37 (Min/Max 17/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 3
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdm
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba MG07ACA... Enterprise Capacity HDD
Device Model: TOSHIBA MG07ACA14TEY
Serial Number: Y870A03ZFFHG
LU WWN Device Id: 5 000039 908c8c0de
Firmware Version: 4902
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:38 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1395) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 8001
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 27
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 41244
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26
23 Helium_Condition_Lower 0x0023 100 100 075 Pre-fail Always - 0
24 Helium_Condition_Upper 0x0023 100 100 075 Pre-fail Always - 0
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 15
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 225
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 31 (Min/Max 15/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 52428803
222 Loaded_Hours 0x0032 007 007 000 Old_age Always - 37503
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 593
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 31667 hours (1319 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
04 53 00 00 00 00 00
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
e5 00 00 00 00 00 00 00 00:12:31.297 CHECK POWER MODE
b4 11 00 70 79 72 00 00 00:12:28.208 SANITIZE DEVICE
e5 00 00 00 00 00 00 00 00:12:28.207 CHECK POWER MODE
b4 00 00 01 00 00 00 00 00:12:28.207 SANITIZE DEVICE
b4 00 00 00 00 00 00 00 00:12:28.206 SANITIZE DEVICE
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 27546 -
# 2 Short offline Completed without error 00% 18629 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdn
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WUH721414ALN6L4
Serial Number: 9JH45NBT
LU WWN Device Id: 5 000cca 258cffe39
Firmware Version: LDGNW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Size: 4096 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:41 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1477) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 393 (Average 392)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11334
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 485
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 485
194 Temperature_Celsius 0x0002 058 058 000 Old_age Always - 36 (Min/Max 17/45)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$ sudo smartctl -a /dev/sdo
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.63-production+truenas] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WUH721414ALN6L4
Serial Number: 9RHPHNMC
LU WWN Device Id: 5 000cca 264d7de1a
Firmware Version: LDGNW2L0
User Capacity: 14,000,519,643,136 bytes [14.0 TB]
Sector Size: 4096 bytes logical/physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database 7.3/5319
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 10 14:00:43 2025 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 101) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: (1464) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 15
2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96
3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 389 (Average 386)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 15
5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18
9 Power_On_Hours 0x0012 099 099 000 Old_age Always - 11334
10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 15
22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 485
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 485
194 Temperature_Celsius 0x0002 062 062 000 Old_age Always - 33 (Min/Max 17/39)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 29
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 16 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 16 occurred at disk power-on lifetime: 11333 hours (472 days + 5 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 1c 58 84 ff bb 40 08 02:50:15.381 READ FPDMA QUEUED
60 1c 50 44 00 00 40 08 02:50:12.296 READ FPDMA QUEUED
60 1c 10 c4 fe bb 40 08 02:50:12.280 READ FPDMA QUEUED
60 1c 08 84 fe bb 40 08 02:50:12.280 READ FPDMA QUEUED
60 1c f0 44 02 00 40 08 02:50:12.277 READ FPDMA QUEUED
Error 15 occurred at disk power-on lifetime: 11331 hours (472 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 1c 10 84 ff bb 40 08 00:07:35.533 READ FPDMA QUEUED
60 1c 00 44 00 00 40 08 00:07:32.449 READ FPDMA QUEUED
60 1c f0 c4 fe bb 40 08 00:07:32.437 READ FPDMA QUEUED
60 1c b0 84 fe bb 40 08 00:07:32.436 READ FPDMA QUEUED
60 1c b0 44 02 00 40 08 00:07:32.431 READ FPDMA QUEUED
Error 14 occurred at disk power-on lifetime: 11331 hours (472 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 1c 98 84 ff bb 40 08 00:06:01.951 READ FPDMA QUEUED
60 1c 90 44 00 00 40 08 00:05:58.866 READ FPDMA QUEUED
60 1c 48 c4 fe bb 40 08 00:05:58.865 READ FPDMA QUEUED
60 1c 40 84 fe bb 40 08 00:05:58.863 READ FPDMA QUEUED
60 1c f0 44 02 00 40 08 00:05:58.861 READ FPDMA QUEUED
Error 13 occurred at disk power-on lifetime: 11331 hours (472 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 d0 8e ff bb 40 08 00:01:18.209 READ FPDMA QUEUED
ef 05 fe 00 00 00 40 08 00:01:15.132 SET FEATURES [Enable APM]
47 00 01 30 08 00 a0 08 00:01:15.132 READ LOG DMA EXT
47 00 01 30 00 00 a0 08 00:01:15.131 READ LOG DMA EXT
47 00 01 00 00 00 a0 08 00:01:15.131 READ LOG DMA EXT
Error 12 occurred at disk power-on lifetime: 11331 hours (472 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 43 00 00 00 00 00 Error: UNC at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 b8 8e ff bb 40 08 00:01:14.776 READ FPDMA QUEUED
60 01 b0 a4 ff bb 40 08 00:01:11.695 READ FPDMA QUEUED
60 01 a8 ab ff bb 40 08 00:01:11.687 READ FPDMA QUEUED
60 01 20 b6 ff bb 40 08 00:01:11.679 READ FPDMA QUEUED
60 01 a0 ce ff bb 40 08 00:01:11.672 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
admin@truenas[~]$
admin@truenas[~]$ lsblk -bo NAME,MODEL,ROTA,PTTYPE,TYPE,START,SIZE,PARTTYPENAME,PARTUUID
NAME MODEL ROTA PTTYPE TYPE START SIZE PARTTYPENAME PARTUUID
sda WDC WUH721414ALE604 1 gpt disk 14000519643136
└─sda1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 5d64fc93-6e46-48d4-b69e-d94d9dceb84c
sdb WDC WUH721414ALE604 1 gpt disk 14000519643136
└─sdb1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 25ec455c-a629-4300-b16d-09deaa3a88a0
sdc TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdc1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 0278dd80-3622-46b5-8a8f-4fa4b6b6142b
sdd TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdd1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 41644b00-0499-4742-9d4e-a8e76f823d61
sde WDC WUH721414ALE604 1 gpt disk 14000519643136
└─sde1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 1851ae7d-b04d-4ce7-a718-5a8aefbcbb2b
sdf WDC WUH721414ALE604 1 gpt disk 14000519643136
└─sdf1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 8c7742ef-a8a0-4dc3-b974-316e43d8a15a
sdg TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdg1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 6406fd6a-053c-4195-babe-f088281483f8
sdh TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdh1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS c9e772ad-f118-4e92-b5bd-c872033b71a1
sdi WDC WUH721414ALN6L4 1 gpt disk 14000519643136
└─sdi1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS dbcd4be4-2531-454e-ae32-ef388712df7a
sdj TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdj1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 176b57a1-a3bc-4bc2-b1ce-390c2d4da6c8
sdk SanDisk X400 M.2 2280 128GB 0 gpt disk 128035676160
├─sdk1 0 gpt part 4096 1048576 BIOS boot f1eb4c83-ddc8-45bc-b59a-5909fba158b5
├─sdk2 0 gpt part 6144 536870912 EFI System 84d5455d-9b3d-4d74-a64a-df269a20e05c
├─sdk3 0 gpt part 34609152 110315773440 Solaris /usr & Apple ZFS 6ecbfa39-b644-4021-bcaa-5c7e684f174d
└─sdk4 0 gpt part 1054720 17179869184 Linux swap 646e196c-7554-4fbe-8f45-45f26bdf5938
└─sdk4 0 crypt 17179869184
sdl WDC WUH721414ALN6L4 1 gpt disk 14000519643136
└─sdl1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS b6014162-d311-47ac-b63c-6e6a72c4f07f
sdm TOSHIBA MG07ACA14TEY 1 gpt disk 14000519643136
└─sdm1 1 gpt part 4096 14000516497920 Solaris /usr & Apple ZFS 5fc7e2f4-0dde-4895-8f1a-432ca652f35e
sdn WDC WUH721414ALN6L4 1 gpt disk 14000519643136
└─sdn1 1 gpt part 4096 14000516501504 Solaris /usr & Apple ZFS 1a4e3a70-25d0-4c61-91bd-9f76014d1ae3
sdo WDC WUH721414ALN6L4 1 disk 14000519643136
└─sdo1 1 part 4096 14000516501504 59d09ab8-9597-4f79-be46-6e770e16dd34
admin@truenas[~]$