Good day, all. I am new to Truenas and generally a novice regarding CLI interfaces. I have created a truenas scale system with a data pool of: 6 x RAIDZ2 | 12 wide with 4 TB HDD. I started to set it up and decided to reboot the system after I set up the pool, dataset and shares. Even though it say…

P20.00.07.00 is the latest version for the 9200 family. The 9300 should be flashed to P16.00.12.00 (link in the resource cited by @Davvo ). And we can now hope that this will bring everything in order.

so when I go to storage - manage disks it shows the list of disks and 24 disks show as not in HDD0 pool. under the pool column instead of it saying HDD0 it says NA.

Why is it showing two HBAs when you wrote about one? I would assume one is from the JBOD; both have old (very old in the first) firmware.

Is this a normal anomaly in the truenas system? I plan to install 2 more Netapp racks. this seems it will create a problem as it will try and assign these drives again and I will not know which ones to leave out.

What you are experiencing is not standard behaviour. Please read What's all the noise about HBAs, and why can't I use a RAID controller? | TrueNAS Community .

so I believe one of the HBA is used for the internal backplane for the 12 bays in the inclosure. the other is connected to external NetApp racks

So you actually have two HBAs in there: A 2308 (flashed 9286) on the right P20 firmware, and a 3008 on an old P10 firmware—should be P16.00.12.00. What’s this second HBA, and how is everything wired?

I would suggest flashing both to more recent firmware, especially the 10.0.0.0 one.

I believed version 24 to be available.

P24 is for the 9400 family, which is not in JGreco’s resource. P16 for the 9300. P20 for the 9200. If you find a logic in there, drop me a line…

All of my hard drives are in my datapool but it is showing 7 unassigned disks

TrueNAS General

priezz September 13, 2024, 11:35am 29

Done

Topic		Replies	Views
HELP Lost a zpool due to device name changes? TrueNAS General	7	185	June 26, 2024
Storage Dashboard shows disk already used in pool as unused disk TrueNAS General	20	844	November 20, 2024
ZFS pool unmountable: invalid label TrueNAS General	32	425	September 5, 2025
Data Pool Causing Kernel Panic -- Options? TrueNAS General SCALE , Import-problem	36	296	February 26, 2026
SOLVED: All of my hard drives are in use but TrueNAS is showing 25 unassigned disks TrueNAS General SCALE	25	821	December 1, 2025

All of my hard drives are in my datapool but it is showing 7 unassigned disks

Related topics